Talk:Tools/tablesaw

From rLab Wiki
Revision as of 13:26, 9 March 2020 by VidarV (talk | contribs) (Created page with "Maybe there should be a note on the induction to cut hardwood slowly or it will wear down the blade quickly. The motor also struggles a bit with thicker hardwood cuts(40mm+)...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Maybe there should be a note on the induction to cut hardwood slowly or

it will wear down the blade quickly. The motor also struggles a bit with thicker hardwood cuts(40mm+)

VidarV (talk) 12:26, 9 March 2020 (UTC)