Welcome to the rLab Wiki
Rules & Policies
<<< Attention required from Gavin for this section? >>>
- Only use equipment that you have been trained on and are confident you can use safely. No solo use of high risk tools.
- Members must be over 18 years old. Anyone visiting who is under this age must be accompanied and supervised by a member at all times, supervising someone else is incompatible with working on your own projects.
- Potentially dangerous or precious equipment should be labelled and members should seek induction before use.
- Dangerous chemicals should be labelled with contents and hazard information.
- Performance of high risk activities should be communicated to other members and guests present if they might be effected. Other members may raise any concerns at that time and the activity cannot continue until those concerns have been addressed.
- No hazardous chemicals in the kitchen. It is a food preparation area and must be treated as such.
- Clean up after using the space, leave your work area AT LEAST as clean as when you arrived if not better
- Anything that is prohibited by our lease or insurance is really actually prohibited (No sleeping, no fissionable materials, etc.)
Information for new members
How to sign up
Come along on a Wednesday open evening!
Getting your Hackspace Induction
Before you can use the Hackspace un-accompanied and have your own access card you'll need to recieve your Hackspace induction which provides important information about how the hackspace is organised and run and how to work safely in the space. These inductions are normally run on a wednesday open evening as part of the sign-up process.
How to find us
How to get in contact with us
The Reading Hackspace is an industrial unit on Weldale Street and internally is divided into 3 main spaces. The main room upstairs is where most electronics and software hacking takes place and also the main social are. The small machine room upstairs houses out Laser cutter and the store of materials for use with it and is used for making activities that do not create any dust or mess. The downstairs space has most of the power tools and is where all metalwork and woodwork activities take place including anything that makes dust, noise, mess or nasty smells. All tools and equipment in the space are the property of the Hackspace unless clearly marked otherwise. You've paid for all the tools and equipment through your membership donations, so please take care of the kit as if it were your own! Please report any damage or dis-function either on the mailing list or directly to any member of the relevant team. We understand that occasional breakages are inevitable in this environment but please let the relevant teams know ASAP when they happen so that repair/replacement can be arranged.
We have a wide variety of tools divided across the 3 main areas of the space and all members are welcome to use them on their projects, some of the more hazardous or valuable tools do require induction before use both to protect members and the equipment!
Here's a listing of some of the larger tools that we have, it does not include the wide range of smaller hand-tools and instruments. If you know of a tool that's missing from this list then please create it's page and add it.
Our Logo and other materials
<<<Links to our logo etc>>> <<<Policy for use of above?>>>
Any current project groups here
Special interest groups
Editing the wiki
If you'd like edit rights on this wiki then please contact Steve-R on the mailing list or at the lab. Yes I know the editing function is very slow to save, Rupert's looking into it.